|
|
FEATURES
|
OTC 6525 |
MotorVac EVAP222 |
|
1 |
Specifically designed for testing and diagnosing of OBD-II EVAP
systems. |
b |
b |
|
2 |
Built to major automakers’ specifications. Will not damage
vehicle components such as; EVAP activated charcoal, O2
sensors,
gaskets, seals, etc. and will not void vehicle’s factory warranty. |
b |
b |
|
3 |
Technology approved & adopted by
G.M., DaimlerChrysler, Ford Motor Co. and others for testing of their EVAP
systems. |
b |
b |
|
4 |
Maintains and monitors 13 inch water
column pressure requirement for OBD-II EVAP testing |
b |
b |
|
5 |
Dual Phase testing capabilities;
first verifies 0.040 & 0.020 leaks with a simple two-minute pass / fail
test. |
b |
b |
|
6 |
For
an even quicker EVAP test procedure; you can combine the test features of
Phase-One and Phase-Two since the design of this tester is such that the flow
meter is operational in both Phases of testing. |
b |
|
|
7 |
LED
self-test diagnostic feature |
b |
|
|
8 |
Singe
hose design |
b |
|
|
9 |
Internal
orifice calibration standards |
b |
|
|
10 |
Diagnostic Smoke is produced with
Nitrogen to safely test EVAP system and with shop-air for all other, non-EVAP
leak testing. |
b |
b |
|
11 |
UltraTraceUV™ fluorescent dye
feature in the smoke pinpoints leak location when viewed under UV light |
b |
b |
|
12 |
All
accessories included |
b |
|
|
13 |
General purpose leak detection
capabilities such as; vacuum, exhaust, injector O-rings, under dash, throttle body,
EGR valves, turbo/intercooler, and most other low pressure systems. |
b |
b |
|
14 |
12 volt operation |
b |
b |